20 ft black n-male to n-female RFC 400 coax cable
20 ft black n-male to n-female RFC 400 coax cable
cables made in USA
  • Load image into Gallery viewer, 20 ft black n-male to n-female RFC 400 coax cable
  • Load image into Gallery viewer, 20 ft black n-male to n-female RFC 400 coax cable
  • Load image into Gallery viewer, cables made in USA

20 ft. Antenna extension cable N-Male to N-Female RFC-400 Ultra Low Loss Coax Cable

Regular price
$42.72 USD
Sale price
$42.72 USD
Regular price
$44.97 USD
Sold out
Unit price
per 

Low-loss N-male to N-Female extension cable, RFC-400 shielded. The cable is 20 feet long and is designed specifically to go between a Nebra Outdoor/Milesight miner and both our 5.8 dBi outdoor 915 MHz miner antenna and our 10 dBi outdoor 915 MHz miner antenna. If you have a miner other than the Nebra Outdoor or Milesight, this will not have the correct connector to go directly between our 5.8 or 10 dBi antenna and your miner.

The antenna to which you will connect this to has a gain. Let's say you will be connecting this to a 5.8 dBi gain antenna. As the cable in between the antenna and device gets longer, you will experience gain loss. With lesser grade shielded extension cables, the huge drop in gain will mean much worse performance. Our special low loss cable limits the cable loss factor and preserves the high gain of your antenna.

Made in USA. This cable is American made and manufactured for superior performance and quality control.

We do recommend RokTape to seal all outdoor connection points.

Compare gain loss of this cable:

915 MHz application: -0.8 dB (Helium mining/LoRa device)
WiFi 2.4 GHz application: -1.3 dB (standard home WiFi networking)
WiFi 5 GHz application: -2.0 dB (dual-band 2.4/5 GHz WiFi to 5 GHz networks)

Compare this to a cheaper RG-58 shielded cable of the same length- the gain loss would be -2.8 dB for 915 MHz, -5.2 dB for 2.4 GHz WiFi, and a whopping -8.6 dB for 5 GHz WiFi

That means standard RG-58 cables have much more gain loss than this cable!

If you invested a lot in your antenna, it is worth the extra amount to get a 400 or better grade low-loss cable to maximize your antenna performance. This goes double for Helium mining- a higher loss cable means you may be getting less reach with your miner, and therefore mining much less.

Why does this cable cost more than other options I see online of the same length?

Cables with a lower grade shielding will cost less because they consume less raw materials and are cheaper to make. This cable is also three times heavier than a CFD-200 grade cable for example, so the shipping cost is higher too- both on import, and for shipment to the end user.

Additional Features:

- Length: 20 feet
- Impedance: 50 OHM
- Frequency: all bands from 0-6 GHz, including 868-915 MHz LoRa, 2400-2700 MHz WiFi/ 5100-5900 MHz WiFi

- Compatible with 2.4 GHz 802.11ac, 802.11n, 802.11g and 802.11b WiFi standards, 915 MHz LoRa standard
- N-male connector to N-Female connector 

Warranty & Support:
Complimentary Telephone and Email/Live Chat Support (Click Here)


State sales tax of 7.75% will be added to CALIFORNIA purchases only. There is no sales tax for any other state.

Return Policy: Coaxial cable may be returned for refund if new within 30 days of delivery. Used coaxial cable cannot be returned except in case of defect. We only cover return shipping in case of wrong item shipped. Returned orders with free shipping selected will incur a 15% recovery fee to help us recover some of the original shipping cost, unless the item is defective or incorrect. Expedited shipping charges paid are non-refundable. For bulk purchases, see our bulk purchase return policy here.